Filter
Top Products
40672201TX Rev.4
B-8
4.1.2 E-mail Address
When a one-touch key in which an E-mail address is registered is used as a destination, a call
is issued to a FAX2NET server telephone number.
If a FAX2NET server telephone number, account number is registered, an E-mail address is
not accepted as a destination.
While the fax is in the redial wait or delayed TX wait state, the FAX2NET server registration
cannot be deleted. (“ILLEAL OPERATION”)
Alarm processing is the same as for international telephone number.
The result of communication with the FAX2NET server is described in the Activity report.
Whether a target mail arrives at the last destination cannot be recognized from the FX051.
The user must therefore confirm the communication result on a FAX2NET Web page.
The head of an E-mail address can be defined up to 20 digits as a destination in the sender
ID column. In the same way, the head of an E-mail address can be defined up to 20 digits as
a destination to the Activity report.
4.2 Broadcasting
4.2.1 Destination Specification
As a broadcasting destination, a general destination number can be mixed together with a
telephone number or E-mail address including an international telephone prefix. Broadcasting
can be specified only with international call or E-mail address.
The method of specifying an E-mail address as a broadcasting destination is the same as of
the normal method using the O.T. key.
When information about the FAX2NET server is not registered, no E-mail address can be
specified as a broadcasting destination. The broadcasting destination cannot include a one-
touch key in which Web URL is registered.
4.2.2 Sending Operation
For broadcasting, a call is issued to destinations one by one.
Even if a broadcasting destination includes multiple international telephone numbers and E-
mail addresses, a call is issued to FAX2NET server destinations one by one. In this case,
multiple destinations cannot be reported to the FAX2NET server.
The communication with the FAX2NET server for each destination is the same as of a single-
destination sending.
The FX051 assumes that the sending to the destination is completed after the sending to the
FAX2NET server ends. At printing of a broadcasting end report, therefore, data may not
arrive at the remote facsimile.