Filter
Top Products
40672201TX Rev.4
4 - 109
Fig. 4-4-3-1/3 AUTO REC Key Operation (When MEM.PASSWORD is not registered.)
4-4-3 AUTO REC Key Operation (When MEM.PASWORD is not registered.)
14:14 FAX
Press AUTO REC. key.
14:14 FAX
AUTO RECEIVE MODE
Press AUTO REC. key.
Press AUTO REC. key.
TEL/FAX ON
TEL/FAX OFF
End of programming + 1 second
(Flash memory writing)
Press AUTO REC. key.
TAD MODE ON
TAD MODE OFF
Press AUTO REC. key.
Memory near end
Press AUTO REC. key.
Operating as MFP terminal
Operats as FAX terminal
14:14 TEL
Press AUTO REC. key.
14:14 TEL
MANUAL RECEIVE MODE
After 3 seconds
elapsed
14:14 T/F
Press AUTO REC. key.
14:14 T/F
TEL/FAX AUTO SW MODE
14:14 TAD
Press AUTO REC. key.
14:14 TAD
TAD/FAX AUTO SW MODE
14:14 MEM
Press AUTO REC. key.
14:14 MEM
MEMORY RX MODE
14:14 PC
Press AUTO REC. key.
14:14 PC
PC MODE
*1
PROGRAMMING
Go to Stand by mode.
1
After 3 seconds
elapsed
1
After 3 seconds
elapsed
*1: When memory reception data
exists in the memory,
refer to the flow chart of
the attached sheet 1.
1
After 3 seconds
elapsed
1
After 3 seconds
elapsed
1
After 3 seconds
elapsed
1