Filter
Top Products
40672201TX Rev.4
4 - 39
TYPE2 : Real time dialing is available when the optional hand set is OFF-HOOK or
press HOOK key.
08. TEL/FAX Switch (ON/OFF)
Switching the TEL/FAX automatic switch function
09. MDY/DMY (MDY/DMY for US/CANADA version. MDY/DMY for INT'L version)
Refer to Table 4-7.
Switching LCD display and report print from month/day/year to day/month/year.
10. Long Document Scan (ON/OFF)
Switching the function of scanning long-size documents (more than 360 mm).
ON : 1500 mm or 60 min.
OFF : 360 mm or 60 min.
11. Tone for Echo (ON/OFF)
Switching this function applicable to poor circuit quality of overseas transmission, etc.
Note: Both ignoring 1st DIS (No. 14) and protective tone (No. 16) are switched at the
same time in setting of one-touch key parameter.
12. MH only (ON/OFF)
Switching the function of limiting image compression to the MH code.
13. H/MODEM RATE (14.4 k/9.6 k/4.8 k)
Selection of H/MODEM RATE for TX/RX
14. T1 (TX) Timer Value (010 - 255)
Registers the time duration (in seconds) for which FX-051 waits for the remote station's
answer. This timer starts when the last dial digit has been sent in the automatic trans-
mission mode.
15. T1 (RX) Timer Value (010 - 255)
Registers the time duration (in seconds) for which FX-051 waits for the remote station's
answer. This timer starts when the automatic reception is started.
16. T2 Timer Value (001 - 255)
Registers the time duration (in seconds) for which FX-051 watch for the EOL interval.
This timer starts when the last EOL has been received.
(in 100 ms steps)
17. DIS BIT 32 (ON/OFF)
To enable or disable the DIS BIT 32. Refer to 4.8.14.