Filter
Top Products
40672201TX Rev.4
2 - 13
39) TEL/FAX automatic switching
(1) If the machine detects a call with a CNG signal indicating an auto send facsimile
call, it starts an automatic document receiving operation.
(2) If it detects a call without a CNG signal, it sounds the buzzer to indicate a
telephone call. The calling person can hear a “ring back” tone within a
predetermined time.
If the operator at the called side does not lift the handset within the predetermined
time, the machine automatically starts a document receiving operation.
Voice conversation will be available automatically through the handset by lifting up the
handset or press the STOP key while the call buzzer is sounding.
Note 1: The predetermined time is selectable between 20 or 35 sec.
40) Session number
The session number is assigned automatically to the document transmitted and is
transmitted together with Sender ID on the top of each page.
41) Time and Date print
Time and Date information of the receiver side can be printed on every page of the
document received (except memory reception).
42) Closed user group (Direct mail rejection )
This feature limits communication by TSI/CSI.
The received TSI/CSI from the remote location is compared with the bottom 4-digits in
One-touch and Speed-dial numbers registered in the machine. When it matches the 4
digits, message receiving is accepted.
43) TX contrast and resolution control
The document transmitted can be controlled with 3-levels of contrast (dark, normal,
light) and 3-levels of resolution (standard, fine, extra fine) by the control panel.