Filter
Top Products
40672201TX Rev.4
4 - 55
4.8.15 T1(TX) and T1 (RX) Timer Value
T1(TX) timer name is changed from T1 T.O.
Refer to Fig.4-3-4-2/3 and Table 4-7.
T1 (RX) timer is reception side.
This setting is added to apply to PTT approval from this series.
Refer to Fig.4-3-4-2/3 and Table 4-7.
4.8.16 T2 Timer Value
T2 timer value means that EOL interval timer.
This setting is added to apply to PTT approval from this series.
Refer to Fig.4-3-4-2/3 and Table 4-7.
4.8.17 TAD I/F
Machine will detect DTMF from distant station and turn to auto-reception mode even if the
machine is under TAD recording mode.
Refer to Fig.4-4-3 and Fig.4-4-12.
4.8.18 Parallel Pick Up
Refer to Fig.4-3-18-2/3.
When user has connected external telephone line to this machine and number for REMOTE
RECEIVE is entered, then this function is available.
Remote reception (Operator can change if recognized as fax called station) is available from
external telephone for FX-051.
Tentative information:Parallele telephone connection is available for this function if the PTT
allows it.
4.8.19 Oki High Speed Protocol for 14.4K
To improve transmission time for 14.4Kbps rate.
4.8.20 Error report ON/OFF
To enable or disable the automatic print out of a message confirmation report upon a commu-
nication error.
In single location transmission, the MCF report is an error report when function No.01
MCF.(SINGLE-LOCATION) is ON.
In other words, single location transmission of function No.01 includes No.03.
Then No.03 is ON during multi-location transmissions, an error report is printed out for each
individual communication error.
An error report which is different from No.02 is printed out for each single location.