Filter
Top Products
Chapter 6 Advanced Operations
112 Color Correction
To enable a color corrector
The following example shows how to enable color
corrector 1 (CCR1). You can proceed in the same way to
enable CCR2.
1
From the top menu, select CCR >CCR1.
2
Press a menu button other than [Mask1] or [Mask2] to
display the menu.
3
Press [CCR], turning it on.
This enables all of the functions of color corrector 1.
To return all color corrector settings to the
defaults
The following example shows how to proceed for color
corrector 1 (CCR1). You can proceed in the same way for
CCR2.
1
From the top menu, select CCR >CCR1.
2
Press a menu button other than [Mask1] or [Mask2] to
display the menu.
3
Press [Unity All].
A message appears asking if you want to return all
settings to the default settings.
4
Press [Yes] in the message to return to the defaults, or
[No] to cancel.
If you pressed [Yes], all color corrector settings are
returned to the default settings.
To copy or swap color corrector settings
1
From the top menu, select CCR >Copy/Swap.
The Copy/Swap menu appears. The status area shows
a copy source list (From) on the left and a copy
destination list (To) on the right.
2
Using any of the following methods, select the copy
source color corrector and the copy destination color
corrector.
• Press directly on the list in the status area.
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knobs.
When you select either the source or destination color
corrector, the other color corrector is selected
automatically.
3
Press [Copy] to execute a copy, or [Swap] to execute a
swap.
To undo a copy or swap
Press [Undo] in the Copy/Swap menu. The color
correctors are restored to their states before the copy or
swap.
Input Video Processing
You can adjust the following for YUV signals.
• Overall video signal gain
• Y signal gain
• C signal gain
• Hue delay
• Black level
To execute input video processing
Display the Input Process menu, then proceed as follows.
1
Press [Input Proc], turning it on.
2
Adjust the following parameters.
Knob Description Setting values
1 (From No) Copy source color
corrector selection
1 or 2
4 (To No) Copy destination color
corrector selection
1 or 2