Filter
Top Products
Chapter 5 Basic Operations
64 Changing the Position and Size of Effect Patterns
Changing Pattern Position and Size With the Joystick
1
Press the [POS] button in the Effect/Wipe control block, lighting it.
The joystick is assigned to the positioner (which changes effect pattern
position and size).
2
For a 2-channel effect, select the channel or channels for which you want to
make settings. (See “To select channels with the Effect/Wipe control block”
(page 61).)
(You can set the parameters for the individual channels.)
3
Operate the joystick as shown below, depending on what you want to
change.
a) Not available for some patterns. For details, refer to “Effect Pattern Transformations and
Modifications” in the Appendix (separate document).
To return the pattern size and position to their default
Press the [CTR] button in the Effect/Wipe control block.
Changing Pattern Size and Position From Menus
1
From the top menu, select Effect/Wipe >M/E Effect >Main.
The Main menu appears.
21
21
1 M/E panel
1.5 M/E panel
CTR button
CTR button
Joystick direction Description Setting values
X (H Position) Horizontal position –200.00 to +200.00
Y (V Position) Vertical position –200.00 to +200.00
Knob (Size)
a)
Effect pattern size 0.00 to 200.00