Filter
Top Products
Chapter 2 Names and Functions of Parts
20 Control Panel Configuration
b Region selection buttons
Used in modes other than macro mode.
Select the target function block of the operation. The
button which is on lights in amber.
M/E button: Selects the M/E region.
PP/ALL (PGM/PST/all) button (on 1.5 M/E panel): In
snapshot mode, selects all regions. In transition rate
input mode and effect snapshot mode, selects the
PGM/PST region.
ALL button (on 1 M/E panel): In snapshot mode, selects
all regions. Has no effect in transition rate input mode
and effect snapshot mode.
c STORE button
Used in modes other than transition rate input mode.
This button lights in amber when on, to indicate that you
can save the current snapshot or effect snapshot, enter
macro edit mode, or delete a saved snapshot, effect
snapshot, or macro.
d BANK SEL (selection) button
Used in snapshot mode or macro mode. Has no effect in
other modes.
This button lights in amber when on, to indicate that you
can use the memory recall buttons to specify a snapshot or
macro register bank.
e Mode selection buttons
Select the operation mode of the Flexi Pad control block.
The button currently turned on lights in amber.
EFF/WIPE (effect shapshot): Selects effect snapshot
mode. You can also use this button when selecting
effect patterns.
SNAPSHOT: Selects snapshot mode.
MCRO (macro): Selects macro mode. Lights in amber in
macro recall mode, and lights in red in macro edit
mode.
TRANS RATE: Selects transition rate input mode.
f Memory recall buttons
The configuration of the memory recall buttons changes
according to the operation mode selected with the mode
selection buttons.
In effect snapshot mode: Comprised of the [0] to [9]
buttons, a [PTN NO. (pattern number)] button, and an
[ENTR (enter)] button.
The state and functions of the [0] to [9] buttons and the
[ENTR] button change depending on the state of the
[PTN NO.] button and the [STORE] button.
For details, see “Selecting Effects With the Flexi Pad
Control Block” (page 57).
In snapshot mode: Comprised of the [0] to [9] buttons, an
[EFF DISS (effect dissolve)] button, and an [AUTO
TRNS (transition)] button. The state and functions of
these buttons change depending on the state of the
[BANK SEL] button and the [STORE] button.
For details, see “Saving Snapshots” (page 125).
In macro mode
• In macro recall mode: Comprised of the [0] to [9]
buttons, an [Executed events/Total Events] button,
and a [TAKE] button. The state and functions of the
buttons change depending on the states of the
[BANK SEL] and [STORE] buttons.
• In macro edit mode: Comprised of the [INS (insert)]
button, [MOD (modify)] button, [DEL (delete)]
button, [PAUS (pause)] button, [ALL (select all)]
button, [EXIT] button, [AUTO INS (auto insert)]
button, [STOR/Register Number (Store/register
number)] button, [<< PREV (goto previous event)]
button, and [NEXT >> (goto next event)] button.
• In pause time entry mode: Comprised of the [0] to
[9] buttons, a [CLR (clear)] button, and a [PAUS/
ENTR (pause/enter)] button.
For details, see “Macros” (page 127).
In transition rate input mode: Comprised of the [0] to [9]
buttons, and an [ENTR (enter)] button.
For details, see “Setting Transition Rates” (page 69).
Effect/Wipe Control Block
Use this block to set the direction of effects and wipes. You
can also add modifiers as required.