Filter
Top Products
Chapter 3 Using Menus
26 Accessing Menus
Note
The menu illustrations in this manual may differ in appearance from the menus
actually shown in the menu display of the control panel.
1
Press the [TOP/SHUTDOWN] button in the menu control block.
The top menu appears.
Tip
If you press the [FILE], [SET UP], or [DIAG] button, the page for that
button appears.
2
In the Top Menu area, select a menu.
The second-level menu of the menu selected in the Top Menu area appears
in the Sub Menu area.
3
Select a menu in the Sub Menu area.
If the menu has only two levels, the page for the second-level menu appears.
If the menu has three levels, a popup window appears so that you can select
a third-level menu.
4
Select a menu from the popup window.
The third-level menu appears.
Accessing Menus by Double Clicking
This manual uses the term “double click” to refer to the action of pressing a
button on the control panel twice in rapid succession (comparable to double
clicking a computer mouse button). You can double click many of the buttons
on the control panel except the top menu selection buttons to directly access
menus related to those buttons. The following table shows the buttons which
access menus by double clicking and the accessed menus.
Tip
The ability to access menus by double clicking is indicated by a horizontal bar
on the face of the button, located over the button name.