Sony MKS-2017 Switch User Manual


 
Chapter 9 System Settings
165Other Settings
To turn beep sounds on and off
Press [Touch Beep], turning it on or off.
To calibrate the touch panel
If touches on the touch panel do not select the desired
menu items, you can use the following procedure to
calibrate the touch panel.
1
Press [Calibration].
The following message appears.
“To perform calibration, please touch the center of
each plus sign.”
2
Press [Yes].
3
Press the center of the [+] mark on the screen.
The [+] mark that you pressed disappears, and another
[+] mark appears on the diagonally opposite side.
4
Press the center of the [+] mark.
A confirmation message appears.
Press [Yes] in the message dialog to confirm the
calibration. Press [No] to cancel the calibration and
return to the Maintenance menu.
To format the hard disk
Use [HDD Format] to format the hard disk. Do this only
when one of the following errors has occurred.
When you press [HDD Format], a confirmation message
appears asking if you really want to format the hard disk.
Press [Yes] in the message dialog to execute the format.
Press [No] to cancel the format.
System Adjustments (System Adjust
Menu)
Use the System Adjust menu to carry out system phase
adjustments, operation switching timing settings, and
illegal color adjustments.
Adjusting the system phase
1
From the top menu, select Setup/Diag >System
>System Adjust.
The System Adjust menu appears. The status area
shows the current settings.
2
Press [Sys Phase].
3
Turn the knobs to adjust the phase.
Setting the operation switching timing
1
Carry out step 1 in the previous item, “Adjusting the
system phase.”
2
Press [Sw Timing].
A popup window appears.
3
Select one of the following.
Any: Switch on the earliest field that can be processed.
Field 1: Switch on field 1.
Field 2: Switch on field 2.
Setting the illegal color limiter
1
Carry out step 1 in the procedure “Adjusting the
system phase”.
2
Press [Color Limiter], to switch the illegal color
limiter on or off.
System Reset and Memory
Initialization (Initialize Menu)
Use the Initialize menu to carry out a system reset or
memory initialization.
When you carry out a system reset, the system is restarted
in the state set for power on (see page 154). Carrying out a
memory initialization returns to the factory default
settings.
Error display Error description
Internal Error: Data HDD Data on the internal hard disk is
corrupt.
Internal Error: HDD
Format
The internal hard disk is not
formatted, or hard disk partitions
cannot be recognized.
Knob Description Setting values
1 (System Phase) System phase
setting
–32.00 to +96.00