Filter
Top Products
Chapter 6 Advanced Operations
123Frame Memory
• Turn the knob.
For Pair files, the video and key files are selected
together.
It is not possible to select either individually.
3
Press [Rename].
A popup window appears.
4
Enter the new name, and press [Enter].
This renames the selected file.
Deleting an image file
1
From the top menu, select Frame Memory >Delete.
The Delete menu appears.
Regardless of whether pair mode is on or off, all saved
frame memory image files appear in the list.
2
Select the file to be deleted.
• Press directly on the list appearing in the status area.
• Press the arrow buttons to select from the list.
• Turn the knob.
• To select all files, press [Select All], turning it on.
If you have selected [Select All], skip to step 5.
3
Select either video or key.
• To delete a video image file, press [Video] above the
thumbnail.
• To delete a key image file, press [Key] above the
thumbnail.
The thumbnail button turns yellow. The file name in
the list also turns yellow, indicating that this is the file
to be affected.
4
To delete more than one file, repeat steps 2 and 3 to
select the files.
5
Press [Delete].
A message appears, asking for confirmation of the
deletion.
6
To carry out the deletion press [Yes], and to cancel
press [No].
If you press [Yes], this deletes the file or files. The
number of files that can be saved shown on the
[Delete] button increases by the number of files
deleted.
If you press [No], the system returns to the state before
step 2.
Knob Description Setting values
1 (No) File number 1 to number of saved image
files
Knob Description Setting values
1 (No) File number 1 to number of saved image
files