Filter
Top Products
172 Other Settings
Chapter 9 System Settings
Utility command list
The status area displays the following abbreviated names
of utility commands.
Command name Function of command button Button state
Lit
a)
Not lit
Editor Enbl Enable and disable the switcher editor port. Enable Disable
SWR GPI Enbl Enable and disable all switcher GPI input ports.
Panel GPI Enbl Enable and disable all control panel GPI input ports.
Safe Title Switch between output (On) and no output (off) of safe title
markers.
On Off
FM V Frame Freeze Switch between frame-unit capture of video to frame memory
(On) and no capture (Off).
FM V Field Freeze Switch between field-unit capture of video to frame memory
(On) and no capture (Off).
FM V Freeze Off Switch between disable freeze capture of video to frame
memory (On) and enable freeze capture (Off).
FM K Frame Freeze Switch between frame-unit capture of key to frame memory
(On) and no capture (Off).
FM K Field Freeze Switch between field-unit capture of key to frame memory
(On) and no capture (Off).
FM K Freeze Off Switch between disable freeze capture of key to frame
memory (On) and enable freeze capture (Off).
SWR GPI ? Test
Fire
b)
Execute test trigger output on the selected GPI output port. Flashes during test
fire execution
–
Mcro Only Set Set macro attachment mode to Macro Only. On Off
Mcro AT with Rate Save transition rate when registering a macro event, and
apply it as the transition rate when executing the event (only
when registering auto transition, key auto transition, or fade
to black).
Mcro AT with A/B Save A/B Bus cross-point settings when registering a macro
event, and apply them as A/B Bus cross-point settings when
executing the event (only when registering auto transitions).
Device 1 to Device
6
Select devices to control. When several devices are
selected, the button pressed first selects the reference
device.
Selection (lights in
green for reference
device)
De-selection
Play Execute play by the selected device, or when pressed
together with the Rec button, execute recording by the
selected device.
Executing play or
recording
Play or recording
over or stopped
Stop Stop play, recording, or cue up by the selected device Play, recording, or
cue up is over or
stopped
Executing play,
recording, or cue
up, or executing jog
or shuttle search
All Stop Stop play, recording, or cue up by all devices. Executing: Flashes
once
Cued up: Flashes in
amber
Cue up over: Lights
in green
–
Cue Up Cue up the selected device. When several devices are
selected, the button lights in green when the reference
device finishes cue up.
Executing: Flashes
Execution over:
Lights in green
Stopped
Start TC Set the timecode of the point where the button is pressed as
the start timecode of the selected device.
Flashes during
execution (beep also
output)
–