Filter
Top Products
Chapter 5 Basic Operations
71Preparing Transitions
2
Select the target of the setting.
• Press [M/E] to set for the M/E bank.
• Press [P/P] to set for the PGM/PST bank (when using the 1.5M/E panel).
The numeric keypad window appears.
3
Enter a number of frames in the range 0 to 999 and press [Enter].
This confirms the input. The transition rate appears beneath the fader lever
in the transition control block.
Selecting Effect Directions
You can select the direction of some effects.
The normal direction is the direction of the arrows shown in the illustrations of
effect patterns in the “Effect Pattern List” in the Appendix (separate document).
The reverse direction is the opposite direction.
s
To select effect directions, you can use either the Effect/Wipe control block or
menus.
Normal direction
Reverse direction