Filter
Top Products
95Advanced Effect Operations
Chapter
Advanced Operations
Advanced Effect
Operations
The procedures in this section mainly show how to operate
with M/E effects (effects used on the M/E bank). The same
procedures can also be used with PGM/PST wipes (wipes
used on the PGM/PST bank).
Transforming Effect Patterns
Note that some effect patterns cannot be transformed.
For more information, refer to “Effect Pattern
Transformations and Modifications” in the Appendix
(separate document).
To change the aspect ratio of an effect
pattern (Aspect)
1
From the top menu, select Effect/Wipe >M/E Effect
>Modify (Ptn 1-999).
The Modify (Ptn No.0001-0999) menu appears.
2
Press [Aspect], turning it on.
3
Set the aspect ratio parameter with knob 1.
a) Minus values make the pattern taller, and plus values make the
pattern longer.
To rotate an effect pattern (Rotation)
1
In the Effect/Wipe >M/E Effect >Modify (Ptn No.
0001-0999) menu (see previous section), press
[Rotation].
A popup window appears.
Aspect: Off
Aspect: On
Knob Description Setting values
1 (Aspect) Aspect ratio of
pattern
–100.00 to +100.00
a)
Rotation: Off
Rotation (Angle): On