Filter
Top Products
Chapter 7 File Operations
140 Operating on Individual Data Files
If you pressed [Yes], the load begins and a window
opens to show its progress.
Note that all existing data in the load destination
registers are deleted before the load starts.
To cancel a load after it has started
Press [Cancel] in the progress window, and press [OK]
in the message box which appears to inform you that
the save has been cancelled.
Deleting the Data of Selected
Categories
You can delete the data for one or more categories saved
in files in a single operation.
1
Carry out steps 1 to 7 of “Saving the Data of Selected
Categories” (see page 139), to select the target
categories and the type of media storing the data you
want to delete.
2
In the File >All (Selected) menu, press [Delete].
A confirmation window appears asking if you want to
execute the deletion.
3
Press [Yes] in the confirmation window to execute the
deletion, or [No] to cancel it.
If you pressed [Yes], the deletion begins and a window
opens to show its progress.
To cancel the data deletion after it has started
Press [Cancel] in the progress window, and press [OK]
in the message box which appears to inform you that
the deletion has been cancelled.
Operating on Individual
Data Files
You can save, load, delete, rename, and copy files
containing frame memory image data.
Loading Data Files
Proceed as follows to load files containing frame memory
image data to registers.
1
From the top menu, select File >Load.
The Load menu appears.
The media, directory, files, and registers used in the
previous load operation appear in the status area.
2
Select the Frame Memory category, and as required
the target media.
For details about the procedure, see “Common
Operations – Selecting the Frame Memory Category
and the Target Media” (page 144).
3
In the File >Load menu, press [Source File].
A file list appears in a popup window.
4
Do one of the following to select the files to load.
• Press directly on the list in the popup window.
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knobs.
5
When you are finished selecting files, press [OK].
Knob Description Setting values
1 (Start File) Number of first file to
load
1 and upwards
2 (Number) Number of files to load 1 and upwards