Filter
Top Products
Chapter 5 Basic Operations
67Modifying Video Borders
Adding Borders to Video
1
Press the [BORD] button in the Effect/Wipe control block, lighting it.
Or, turn [Border] on in the Effect/Wipe >M/E Effect >Main menu (see page
58).
2
Set the following parameter with knob 1.
To set border colors
1
For a 2-channel effect, in the Effect >Wipe >M/E Effect >Main menu (see
page 61), select the channel or channels for which you want to make
settings.
(You can set parameters for the individual channels.)
Note that for effects other than 2-channel effects, it is not necessary to carry
out channel selection. Begin with step 2.
2
Press [Border Color].
A popup window appears, displaying the same 8 colors as a color bar.
3
Press the button for the color that is closest to the desired color.
12
2 1
1 M/E panel
1.5 M/E panel
SOFT button
SOFT button
Knob Description Setting values
1 (Width) Width of border 0.00 to 100.00