Filter
Top Products
Chapter 2 Names and Functions of Parts
18 Control Panel Configuration
a Transition execution section
This works in the same way as the transition execution
section in the M/E transition control block (see page 16).
b Transition type selection buttons
To select the type of transition, press one of the following
buttons, turning it on.
MIX: In a background transition, the new video overlaps
the current video, finally replacing it. During the
transition, the sum of the output levels of the PGM bus
and the PST bus is maintained at 100%.
WIPE: A transition using the selected wipe pattern is
executed, so that the new video wipes away the current
video.
On how to select a wipe pattern, see “Selecting
Effects” (page 56).
PST (preset) COLOR MIX: In the first transition, a color
matte is gradually mixed into the current video. In the
second transition, the new video is gradually mixed
into the color matte.
You can perform both of these operations in a single
transition.
For details, see “Setting a Preset Color Mix” (page
175).
M/E Key Transition Control Block
Use this block to insert and delete keys in independent M/
E background video transitions. The transitions are
independent of the transitions performed with the M/E
transition control block (see page 16).
This control block is provided only on the 1.5 M/E and 1.5
M/E wide panels. However, of the four buttons, the [KEY1
ON] and [KEY2 ON] buttons are also found on the 1 M/E
panel, where they are located in the M/E transition control
block (see page 16).
a KEY1 ON and KEY2 ON buttons
Press the corresponding button to instantly insert or delete
key 1 or key 2. The [KEY1 ON] button lights in red when
key 1 is inserted into the program video (final output
video). Otherwise it lights in amber. The [KEY2 ON]
button works in the same way.
b AUTO TRANS (transition) buttons
Press the corresponding button to insert or delete key 1 or
key 2 at the specified transition rate. The key fades in
(insert) or fades out (delete). The transition begins as soon
as the button is pressed, and the button lights in amber. The
button goes out when the transition finishes.
See “Setting Transition Rates” (page 69) for more
information about how to specify transition rates.
Downstream Key/Fade to Black
Control Block
Use this block to insert and delete downstream keys, and
to fade to black.
a FTB (fade to black) button
Press this button to execute a fade to black at the specified
transition rate. The button lights in amber when pressed. It
lights in red when the fade to black is completed, for as
long as black is output.
AUTO
TRANS
CUT
WIPE
PST
COLOR
MIX
MIX
TRANSITION TYPE
FRAMES
1Transition execution section
2Transition type selection buttons
AUTO
TRANS
AUTO
TRANS
KEY2
ON
KEY1
ON
KEY1 KEY2
1KEY1 ON and KEY2 ON buttons
2AUTO TRANS buttons
FTB
DSK
PVW
AUTO
TRANS
AUTO
TRANS
DSK2
ON
DSK1
ON
DSK1 DSK2
1FTB button
2DSK PVW button
3DSK independent transition
execution section