Filter
Top Products
Chapter 3 Using Menus
41Basic Menu Operations
Parameter values can be set with either of the following methods.
• Rotate the knobs (1 to 5) corresponding to the parameters.
• Press the parameter button corresponding to a parameter, and enter a numeric
value in the numeric keypad window.
Parameter values are indicated by the length of the bars on the buttons and by
the numeric values under the bars.
In explaining specific operations, this manual gives examples of typical knob
settings, expressed as shown below.
Example 1: When a pattern key is selected
Example 2: When a video process is selected
(The buttons of parameter group 1/2 are shown first, changing to parameter
group 2/2 when the [More] button in the position of knob 5 is pressed.
Parameter group name
Knob 1 Knob 2
Knob 3 Knob 4 Knob 5
Knob Description Setting values
1 (Size) Size of pattern 0.00 to 100.00
2 (Soft) Softness of edge width 0.00 to 100.00
3 (Density) Key density 0.00 to 100.00
4 (Pattern) Pattern number 1 to 24
Parameter group 1/2
Knob Description Setting values
2 (Video Gain) Overall gain of video signals –200.00 to +200.00
3 (Y Gain) Gain of luminance signals –200.00 to +200.00
4 (Black Level) Black level –7.30 to +109.58
Parameter group 2/2
Knob Description Setting values
2 (Video Gain) Overall gain of video signals –200.00 to +200.00
3 (C Gain) Gain of chrominance signals –200.00 to +200.00
4 (Hue Delay) Amount of hue offset –180.00 to +180.00