Filter
Top Products
Chapter 6 Advanced Operations
135Copying
Copying
Copy Operation Targets
You can copy setting states between the following four
keyers.
Setup data and key memory data is not copied.
• M/E key 1
• M/E key 2
• Downstream key 1 (DSK1)
• Downstream key 2 (DSK2)
Using Buttons to Copy Key Settings
You can easily copy keyer settings by using the AUX
delegation buttons ([KEY1], [KEY2], [DSK1], and
[DSK2]) in the AUX bus control block to specify the copy
source and copy destination.
Example: Copying M/E key 1 to M/E key 2
In the AUX bus control block (see page 15), hold down the
[KEY 1] delegation button and press the [KEY 2] button.
A beep sounds and the copy is executed.