Filter
Top Products
Chapter 3 Using Menus
30 Interpreting Menu Screens
For details about page numbers, refer to “Menu Tree” in the Appendix
(separate document).
b Back button
Returns to the most recently displayed menu. You can go back up to maximum
of 50 menus.
This button is disabled when the display history has been erased and when you
have backed up through the entire display history.
For details about operation, see “Selecting menus from the display history”
(page 40).
c Fwd (forward) button
Redisplays the menu that was visible when you last pressed the Back button.
This button is disabled when the display history has been erased, when you have
moved forward through the entire display history, and when the display history
has been updated by displaying a new menu.
For details about operation, see “Selecting menus from the display history”
(page 40).
d Menu switch buttons
You can use the following buttons to switch between the menus when you have
selected a Key menu or an Effect/Wipe menu.
Main Menu button: Displays a menu with frequently used items.
Detail Menu button: Displays a popup window for selecting menus to make
detailed settings.
e Menu title buttons
Except for the Top button, these buttons display the title of the selected of the
selected menu. The upper buttons correspond to upper level menus. In the
example of the previous figure, [Top] is the top menu, [Key] is a first-level
menu, and [M/E Key1] is a second-level menu.
When you press a button, a popup window appears to allow you to select a menu
from the next level.
For details about operation, see “Selecting by navigating the menu tree” (page
39).
f Parameter buttons
Parameters adjustable by knobs and their values are shown on the buttons.
When you press one of these buttons, the numeric keypad window (see page 33)
opens so that you can enter a setting value.
g Button area and status area
The button area displays the buttons of the operation target items in the selected
menu.
In the setup menu and other menus, a status area may also be displayed to show
lists for selecting setting values (see following figure).