Filter
Top Products
Chapter 5 Basic Operations
75Executing Transitions
• Moving the lever toward the side where LEDs are lit does not execute a
transition. However, the non-sync state is released when the lever reaches the
edge of its range, enabling you to execute a transition with the next operation.
• Moving the lever toward the side where LEDs are not lit executes a transition
across the remaining lever range.
An auto transition is possible even if the fader lever is in a non-sync state. When
you press the [AUTO TRANS] button, the transition indicator LEDs light as
always to show the progress of the transition. But when the transition finishes,
two of the LEDs light to indicate the non-sync state.