Filter
Top Products
Chapter 7 File Operations
142 Operating on Individual Data Files
8
When you are finished selecting files, press [OK].
The popup window closes.
9
In the File >Save menu, press [Save].
A confirmation window appears asking if you want to
execute the save.
10
Press [Yes] in the confirmation window to execute the
load, or [No] to cancel it.
If you pressed [Yes], the save begins and a window
opens to show its progress.
To cancel a save after it has started
Press [Cancel] in the progress window, and press [OK]
in the message box which appears to inform you that
the save has been cancelled.
Deleting Data Files
Proceed as follows to delete frame memory image data
files.
1
From the top menu, select File >Delete.
The Delete menu appears.
The media, directory, and files used in the previous
delete operation appear in the status area.
2
Select the Frame Memory category, and as required
the target media.
For details about the procedure, see “Common
Operations – Selecting the Frame Memory Category
and the Target Media” (page 144).
3
In the File >Delete menu, press [Target File].
A file list appears in a popup window.
4
Do one of the following to select the files to delete.
• Press directly on the list in the popup window.
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knobs.
5
When you are finished selecting files, press [OK].
The popup window closes.
6
In the File >Delete menu, press [Delete].
A confirmation window appears asking if you want to
execute the deletion.
7
Press [Yes] in the confirmation window to execute the
deletion, or [No] to cancel it.
If you pressed [Yes], the deletion begins and a window
opens to show its progress.
To cancel a file deletion after it has started
Press [Cancel] in the progress window, and press [OK]
in the message box which appears to inform you that
the deletion has been cancelled.
Renaming Data Files
Proceed as follows to rename a frame memory image data
file.
1
From the top menu, select File >Rename.
The Rename menu appears.
The media, directory, and files used in the previous
rename operation appear in the status area.
2 (Number) Number of destination
files
1 and upwards
Knob Description Setting values
Knob Description Setting values
1 (Start File) Number of first file to
delete
1 and upwards
2 (Number) Number of files to
delete
1 and upwards