Filter
Top Products
Chapter 6 Advanced Operations
99Advanced Effect Operations
5
Select the operating channels. (See “Selecting
Channels” (page 61).)
6
Set the following parameters with the knobs.
Light mode:
a) 0.00 is no luminance component (edges are black). 100.00 is no
addition. 200.00 is twice as bright.
b) 0.00 is light striking from the right side of the picture. –100.00 is one
rotation in the counterclockwise direction, and +100.00 is one
rotation in the clockwise direction.
Color mode:
a) Knobs 3 and 4 are shared by parameter groups 1/2 and 2/2.
b) 0.00 is light striking from the right side of the picture. –100.00 is one
rotation in the counterclockwise direction, and +100.00 is one
rotation in the clockwise direction.
To soften beveled edges
1
In the Effect/Wipe >M/E Effect >Beveled Edge menu,
turn [Edge Soft] on.
2
Select the operating channels. (See “Selecting
Channels” (page 61).)
3
Set the following parameters with the knobs.
Knob Description Setting values
1 (Inten 1) Luminance of
edges on side close
to light source
0.00 to 200.00
a)
2 (Inten 2) Luminance of
edges on side away
from light source
0.00 to 200.00
a)
3 (Angle) Direction of light
source
–100.00 to +100.00
b)
2
1
12
1
2
12
Example: Changing the angle value
Inten 1: 80
Inten 2: 180
Intensity 1
Intensity 2
Intensity 1Intensity 2
Intensity 2
Intensity 1
Intensity 1Intensity 2
Angle
Angle
The edges
corresponding to Inten 1
and Inten 2 change
depending on the angle.
j
Parameter group [1/2]
Knob Description Setting values
1 (Lum 1) Luminance of
edges on side
close to light
source
0.00 to 100.00
2 (Sat 1) Saturation of edges
on side close to
light source
0.00 to 100.00
3 (Hue)
a)
Hue of edges 359.99 to 0.00
4 (Angle)
a)
Direction of light
source
–100.00 to +100.00
b)
Parameter group [2/2]
Knob Description Setting values
1 (Lum 2) Luminance of
edges on side away
from light source
0.00 to 100.00
2 (Sat 2) Saturation of edges
on side away from
light source
0.00 to 100.00
3 (Hue)
a)
Hue of edges 359.99 to 0.00
4 (Angle)
a)
Direction of light
source
–100.00 to +100.00
b)
Knob Description Setting values
1 (Inner) Softness of inner
side of edges
0.00 to 100.00
2 (Boundary) Softness of edge
boundaries
0.00 to 100.00
Inner
Boundary