Filter
Top Products
Configuration Examples 233
4 Define the DSCP + Conform-Level -> Service parameter mapping table. Allocate a
set of service parameters for the packets from PC1 according the mapping table
for DSCP 63.
[SW8800]qos conform-level 0
[SW8800-conform-level-0]dscp 63 : 32 4 4 4 0
The modified DSCP + Conform-Level -> Service parameter mapping table:
Re-allocate service parameters for the packets from PC1.
Re-allocate service parameters for the packets from PC1.
[SW8800-GigabitEthernet7/1/1]traffic-priority inbound ip-group 2000
dscp 63
Traffic Redirection
Configuration Example
Forward the packets sent from PC1 (IP 1.0.0.1) during the time range from 8:00 to
18:00 every day to the address 2.0.0.1.
Figure 12 Networking for QoS configuration
1 Define the time range from 8:00 to 18:00.
[SW8800]time-range 3com3com 8:00 to 18:00 daily
2 Define the traffic from PC1.
Create a number-based basic ACL 2000 and enter it.
[SW8800]acl number 2000
Define ACL rule for the traffic from PC1.
6 0
7 0
Table 26 Modified CoS-> Conform-Level Mapping Table
COS Value Drop-precedence
Table 27 Modified DSCP+Conform-Level>Service Parameter Mapping Table
DSCP CL
Policied-
DSCP
Policied-
EXP
Policied-
802.1p
Policied-
Localprec
Policied-Drop
Precedence
63 0 32 4 4 4 0
GE7/1/8
GE7/1/1
GE7/1/2
VLAN2,
1.0.0.1/8
VLAN3,
2.0.0.1/8
PC1
PC2
GE7/1/8
GE7/1/1
GE7/1/2
VLAN2,
1.0.0.1/8
VLAN3,
2.0.0.1/8
PC1
PC2