Filter
Top Products
2
PORT CONFIGURATION
This chapter covers the following topics:
■ Ethernet Port Overview
■ Configuring Link Aggregation
Ethernet Port
Overview
The following features are found in the Ethernet ports of the Switch 8800:
■ 10GBASE-X-XENPAK 10-Gigabit Ethernet ports work in 10-gigabit full duplex
mode.
■ 10GBASE-X-XFP operates in 10 Gbps full duplex mode, which needs no
configuring.
■ 1000BASE-X-SFP Gigabit Ethernet ports work in gigabit full duplex mode.
■ 10/100/1000BASE-T Gigabit Ethernet ports support MDI/MDI-X auto-sensing,
and the modes are 1000 Mbps full duplex, 100 Mbps half/full duplex, and 10
Mbps half/full duplex. These modules also support auto-negotiation
Configuring an Ethernet port is described in the following sections:
■ Configuring Ethernet Ports
■ Example: Configuring the Default VLAN ID of the Trunk Port
■ Troubleshooting VLAN Port Configuration
Configuring Ethernet
Ports
Tasks for configuring Ethernet ports are described in the following sections:
■ Entering Ethernet Port View
■ Enabling and Disabling Ethernet Ports
■ Setting the Description Character String for an Ethernet Port
■ Setting the Duplex Attribute of the Ethernet Port
■ Setting the Speed of the Ethernet Port
■ Setting the Cable Type for an Ethernet Port
■ Setting Flow Control for an Ethernet Port
■ Permitting/Forbidding Jumbo Frames on the Ethernet port
■ Setting the Maximum MAC Addresses an Ethernet Port Can Learn
■ Setting the Link Type for an Ethernet Port
■ Adding an Ethernet Port to a VLAN
■ Setting the Default VLAN ID for an Ethernet Port
■ Copying a Port Configuration to Other Ports