Filter
Top Products
SNMP 327
The authentication-mode parameter specifies the use of authentication. The
privacy-mode parameter specifies the use of authentication and encryption. This
parameter is supported only in SNMP V3.
For details, see the Switch 8800 Command Reference Guide.
Creating and Updating View Information or Deleting a View
Use the following commands to create, update the information of views, or delete
a view.
Perform the following configuration in system view.
Setting the Size of an SNMP Packet Sent or Received by an Agent
Use the following commands to set the size of SNMP packet sent or received by an
agent.
The agent can receive or send the SNMP packets ranging from 484 bytes to 17940
bytes. By default, the size of an SNMP packet is 1500 bytes.
Perform the following configuration in system view.
Enabling and Disabling Transmission of Trap Information
To enable or disable transmission of trap information, perform the following
configuration in Ethernet port view.
Disabling the SNMP Agent
To disable the SNMP Agent, perform the following configuration in system view.
Table 53 Creating and Updating View Information or Deleting a View
Operation Command
Create or update view information snmp-agent mib-view { included |
excluded } view-name oid-tree
Delete a view undo snmp-agent mib-view view-name
Table 54 Setting the Size of an SNMP Packet Sent or Received by an Agent
Operation Command
Set the size of an SNMP packet set or received
by an agent
snmp-agent packet max-size byte-count
Restore the default size of an SNMP packet
sent or received by an agent
undo snmp-agent packet max-size
Table 55 Enable/Disable Transmission of Trap Information
Operation Command
Enable the current port to transmit the trap
information
enable snmp trap updown
Disable the current port from transmitting trap
information
undo enable snmp trap updown
Table 56 Disabling SNMP Agent
Operation Command
Disable snmp agent undo snmp-agent