Configuring Logon User ACL Control 239
You can import different ACLs in the three commands listed above.
See the Switch 8800 Command Reference Guide for details about these
commands.
Currently you can import only the basic ACLs with digit IDs.
Configuration Example Only SNMP users from 10.110.100.52 and 10.110.100.46 can access the switch.
Figure 17 ACL configuration for SNMP users
1 Define a basic ACL.
[SW8800]acl number 2000 match-order config
[SW8800-acl-baisc-2000]rule 1 permit source 10.110.100.52 0
[SW8800-acl-baisc-2000]rule 2 permit source 10.110.100.46 0
[SW8800-acl-baisc-2000]quit
2 Import the ACL.
[SW8800]snmp-agent community read 3com acl 2000
[SW8800]snmp-agent group v2c 3comgroup acl 2000
[SW8800]snmp-agent usm-user v2c 3comuser 3comgroup acl 2000
Internet
Switch