Filter
Top Products
342 CHAPTER 11: SYSTEM MANAGEMENT
Configure Switch SW88002:
1 Enter system view.
<SW88002> system-view
2 Set SW88001 as the NTP server.
[SW88002]ntp-service unicast-server 1.0.1.11
The above examples synchronized SW88002 by SW88001. Before the
synchronization, the SW88002 is shown in the following status:
[SW88002]display ntp-service status
clock status: unsynchronized
clock stratum: 16
reference clock ID: none
nominal frequency: 100.0000 Hz
actual frequency: 100.0000 Hz
clock precision: 2^17
clock offset: 0.0000 ms
root delay: 0.00 ms
root dispersion: 0.00 ms
peer dispersion: 0.00 ms
reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
After the synchronization, SW88002 turns into the following status:
[SW88002]display ntp-service status
clock status: synchronized
clock stratum: 8
reference clock ID: LOCAL(0)
nominal frequency: 100.0000 Hz
actual frequency: 100.0000 Hz
clock precision: 2^17
clock offset: 0.0000 ms
root delay: 0.00 ms
root dispersion: 10.94 ms