3Com 3.01.01 Switch User Manual


 
22 CHAPTER 1: SYSTEM ACCESS
Features and Functions
of the Command Line
Tasks for configuring the features and functions of the command line are
described as follows:
Online Help
Common Command Line Error Messages
History Command
Editing Features of the Command Line
Displaying Features of the Command Line
Online Help
The command line interface provides full and partial online Help modes.
You can get the help information through these online help commands, which are
described as follows.
Enter ? in any view to get all the commands in it and corresponding
descriptions.
<SW8800>?
User view commands:
language-mode Specify the language environment
ping Ping function
Local-user view Configure local user
parameters
[SW8800-user-
user1]
Enter local-user
user1 in System view
User interface view Configure user
interface parameters
[SW8800-ui0] Enter user-interface
0 in System view
FTP Client view Configure FTP Client
parameters
[ftp] Enter ftp in user view
PIM view Configure PIM
parameters
[SW8800-PIM] Enter pim in System
view
RIP view Configure RIP
parameters
[SW8800-rip] Enter rip in System
view
OSPF view Configure OSPF
parameters
[SW8800-ospf] Enter ospf in System
view
OSPF area view Configure OSPF area
parameters
[SW8800-ospf-0.
0.0.1]
Enter area 1 in OSPF
view
Route policy view Configure route policy
parameters
[SW8800-route-
policy]
Enter route-policy
policy1 permit node
10 in System view
Basic ACL view Define the rule of
basic ACL
[SW8800-acl-
basic-2000]
Enter acl number
2000 in System view
Advanced ACL view Define the rule of
advanced ACL
[SW8800-acl-adv
-3000]
Enter acl number
3000 in System view
Layer-2 ACL view Define the rule of
layer-2 ACL
[SW8800-acl-
link-4000]
Enter acl number
4000 in System view
RADIUS server group
view
Configure radius
parameters
[SW8800-radius-
1]
Enter radius scheme
1 in System view
ISP domain view Configure ISP domain
parameters
[SW8800-isp-163
.net]
Enter domain
isp-163.net in System
view
Table 18 Function Feature of Command View (continued)
Command view Function Prompt Command to enter