Filter
Top Products
Sample VCX Server Reconfiguration 107
Sample VCX Reconfiguration Script (continued)
-------------------------- Configuring Hostname ---------------------------
Enter system hostname : test-three
In this sample script, the host name is being changed from test-one to
test-three.
--------------------- Configuring IP Interface 'eth0' ---------------------
IP Address : 10.230.64.40
Network Subnet Mask : 255.255.255.0
Default Gateway Address : 10.230.64.254
In this sample script, the IP address of eth0 is being changed from
10.230.64.30 to 10.230.64. 40. Other parameters remain unchanged.
--------------------- Configuring IP Interface 'eth1' ---------------------
Interface State : enabled
IP Address : 10.230.64.41
Network Subnet Mask : 255.255.255.0
Default Gateway Address : 10.230.64.254
In this sample script, the IP address of eth1 is being changed from
10.230.64.31 to 10.230.64. 41. Other parameters remain unchanged.
------------------------- Configuring DNS Servers -------------------------
Enter DNS servers one at a time.
When done, enter 0.0.0.0 to stop.
Primary DNS Server : 10.25.10.31
Secondary DNS Server : 10.26.10.31
Tertiary DNS Server : 10.27.10.31
In this sample script, DNS server IP addresses remain unchanged.
----------------------- Configuring DNS Search Path -----------------------
Press Enter to leave the current path unchanged, or specify
a new search path, with spaces separating each entry.
DNS Search Path : yourcompany.com
In this sample script, the DNS search path remains unchanged.