Filter
Top Products
236 APPENDIX B: UPGRADING VCX SERVER SOFTWARE FROM V7.1.X TO V7.1.Y
To upgrade the Authentication and Directory server in Region 1:
1 Log in, as root, to the Call server in Region 1.
2 Stop the Tomcat process by entering the following commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3 Log in, as root, to the Authentication and Directory server in Region 1.
4 Ensure that database replication has no errors (see Preliminary Steps
) and
then drop replication by entering the following commands:
cd /opt/3com/VCX/vcxdata/bin
su cworks
./dropReplication
The drop replication script starts. Follow these steps:
a The
Enter the VCX Site Identification i.e. Site Id prompt
appears.
Enter the site ID configured for Region 1.
b The
Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE
: prompt appears.
Enter the number of Master sites. To determine the number of Master
sites associated with this server, use the listVcxdata command. See
Manually Configuring Replication for an IP Telephony Server or IP
Telephony and Messaging Server for more information. In this
example, there is one Master site, Region 2.
c The
Enter the MASTER DEFINITION SITE IP Address [IP
address]
prompt appears.
Enter the IP address of the Master Definition site. This is the IP address
of the eth0 interface on this server (the Authentication and Directory
server in Region 1).
d The
Enter the MASTER SITE 1 IP Address [0.0.0.0] prompt
appears.
Enter the IP address of the Master Site. This is the IP address of the
eth0 interface on the Authentication and Directory server in Region 2.
If there are more than one Master Sites, this question repeats until the
number of master sites specified in step b is reached.
e The
Do you want to continue with the above settings? [n/y]:
prompt appears.
Enter
y to continue. The script executes.