Filter
Top Products
Backing Up and Restoring the Authentication and Directory Server Database 83
scp or ssh, you will be prompted to confirm that you want to trust the
target server.
1 Log in to both the primary and secondary servers hosting Tomcat using
the tomcat account.
Depending on your VCX configuration, Tomcat runs on either the IP
Telephony server, the IP Telephony and IP Messaging server, or the Call
server.
2 Enter the following commands, on each server, to change the directory
and stop Tomcat:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3 Log in to both the primary and secondary Authentication and Directory
servers.as user cworks.
Depending on your VCX configuration, the Authentication and Directory
service runs on either the IP Telephony server, the IP Telephony and IP
Messaging server, or the Authentication and Directory (standalone) server.
4 Enter the following commands, on each server, to change the directory
and stop the VCX Authentication and Directory service.
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata stop
5 Enter the following command on both the primary and secondary
Authentication and Directory servers:
cd /opt/3com/VCX/vcxdata/bin
6 Enter the following command on the primary VCX Authentication and
Directory server to drop replication:
./dropReplication
7 Enter the following command on both the primary and secondary servers
to restore the VCX Authentication and Directory server database:
./restoreVcxdata
The utility prompts you to verify that Tomcat and the VCX Authentication
and Directory server services are stopped.
Enter
y to confirm the services are stopped.
The
Enter the VCX Site Identification i.e. Site Id prompt
appears.