Filter
Top Products
Upgrading a Single-Site System With Four Servers 179
Follow the procedures in this section to upgrade the four-server
configuration at a single site from VCX version 7.0 software to VCX
version 7.1 software.
Before you begin the upgrade procedures on the four servers, perform
these steps.:
1 Log in as root on the primary IP Telephony server and on the secondary IP
Telephony server.
2 Stop the Tomcat process, first on the primary IP Telephony server and
then on the secondary IP Telephony server by entering these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat stop
3 Ensure that database replication has no errors (see Preliminary Steps) and
then drop replication on the primary IP Telephony server by entering these
commands:
cd /opt/3com/VCX/vcxdata/bin
su cworks
./dropReplication
The drop replication script starts. Follow these steps:
a The
Enter the VCX Site Identification i.e. Site Id prompt
appears.
Enter site ID configured for this system. For single-site systems, the site
ID is identical for both the primary IP Telephony server and the
secondary IP Telephony server.
b The
Enter the Number of MASTER SITEs other than the MASTER
DEFINITION SITE
[1]: prompt appears.
Press Enter to accept the default.
c The
Enter the MASTER DEFINITION SITE IP Address [IP
address]
prompt appears.
Enter the IP address of the Master Definition site or press Enter if the
displayed address is correct. This is typically the IP address of eth0 on
the primary VCX server.
d The
Enter the MASTER SITE 1 IP Address [0.0.0.0] prompt
appears.
Enter the IP address of the Master Site. This is typically the IP address
of eth0 on the secondary VCX server.