Filter
Top Products
18 Choose how to proceed:
For users connected via the parallel cable, the default printer driver settings
should suffice.
For instructions on using the Apple LaserWriter Utility for Windows, see
“Setting Additional Parameters With the Apple LaserWriter Utility for
Windows,” later in this chapter.
To configure your printer software with NetWare, see “Initial Novell NetWare
Setup,” later in this chapter.
Installing the printer software for Windows NT
Use the setup program on WIN31/DISK1 on the CD, or use the Windows 3.1
floppy disks to install software for Windows NT. The steps to install the
PostScript Printer Description (PPD) file for the LaserWriter 12/640 PS (or
other Apple printer) on a Windows NT system are similar to those in the
previous sections for Windows 3.1, except that you select Custom Installation
(step 9) and click “Windows NT Printer Software.” Make sure the other
checkboxes are deselected, then follow these steps:
1 Click Install. Instructions for installing the Windows NT software appear.
2 Click Continue.
The Print Manager appears.
3 Choose Create Printer from the Print Manager’s Printer menu.
The Create Printer dialog box appears.
4 Select Other (at the bottom of the list) in the Driver Combo box.
5 Enter the pathname for Disk 2.
6 Select the printer driver that corresponds to your printer and click OK.
77
Setting Up the Printer for Windows, DOS, and NetWare Users