Filter
Top Products
What to do next
Once you decide how you want to set up the printer, proceed as follows:
m
PSERVER
To set up the printer as a print server, read about how to use
PCONSOLE in the next section, then
m if you want a simple setup, read “Step 2, Option A: Setting Up the
Printer as a Print Server (Using PCONSOLE),” later in this chapter.
m if you want to assign a password, read “Step 3: Assigning a Password for
the Print Server (Optional),” later in this chapter.
m
RPRINTER
To set up the printer as a remote printer, read about how to use
PCONSOLE in the next section, then skip to “Step 2, Option B: Setting Up
the Printer as a Remote Printer (RPRINTER Mode),” later in this chapter.
For both PSERVER and RPRINTER, you must also follow the instructions in
“Step 4: Setting Up the PostScript Printer Driver for NetWare,” later in this
chapter.
For more information about using the Apple LaserWriter Utility, read “Setting
Additional Parameters With the Apple LaserWriter Utility for Windows,” later
in this chapter.
For instructions on setting up the printer for access by Mac OS clients on a
NetWare network, see Appendix B.
80
Chapter 3