Filter
Top Products
Step 2, option A: Setting up the printer as a print server
(using PCONSOLE)
To set up your printer as a print server you must run PCONSOLE under DOS
to specify the print server (PSERVER mode) and create a print queue.
IMPORTANT
The procedures in this section are specific for a version of
PCONSOLE running under NetWare 4.02. If you are running PCONSOLE
under NetWare 4.1 or NetWare 3.x, the menus and commands will differ
somewhat.
Specifying a print server
Your first task is to start PCONSOLE and specify the LaserWriter 12/640 PS
as the print server.
1 Log on to a file server from DOS on a client computer.
IMPORTANT
You must have supervisor or equivalent privileges to create a print
server.
2 At the DOS prompt, type
PCONSOLE
and press Enter.
The utility starts.
3 Press F4.
This changes PCONSOLE to bindery mode, and the Available Options menu
appears, displaying printer console options.
Print Queues
Print Servers
Quick Setup
Change Current NetWare Server
82
Chapter 3