Filter
Top Products
Resetting the printer’s TCP/IP interface
If you’re having problems with your TCP/IP connection to the printer and
can’t solve the problem by any other means, you may try resetting the printer’s
TCP/IP interface.
m
From the main menu of the TCP/IP Printer Configuration Utility menu, press 9
and Enter.
IMPORTANT
If you reset the printer while a document is printing, it may not
finish printing.
Restoring settings to their factory defaults
To restore the settings to their factory defaults:
m
From the main menu of the TCP/IP Printer Configuration Utility menu, press 10
and Enter.
IMPORTANT
If you choose this option while a document is printing, it may not
finish printing.
Using the Apple and Windows utilities to configure the printer
There are a number of other configuration choices you can make with the
Apple and Windows utilities; for example, setting how long the printer should
wait before going into its energy-saving mode. See Appendix A for a list of
these options and Chapters 2 and 3 for details.
What to do next
The printer is now set up on your TCP/IP network. If you want to install any
options, see Chapter 5.
WARNING
This option erases the utility’s password and the printer’s IP
address. You must reset the address as described in “Step 3: Assigning
an IP Address to the Printer,” earlier in this chapter.
132
Chapter 4