Filter
Top Products
Installing from the floppy disks
Installing on a Windows 95 computer
1 Find the Windows disks containing the printer software and make sure they’re write-
protected.
Slide up the write-protection tab in one corner of the floppy disk so that you
can see through the hole.
2 Start Windows 95.
Before installing the software, make sure the Windows Control Panel and
Printer folder are closed.
3 Insert
LaserWriter Disk 1 for Windows 95
into a floppy disk drive.
Note: If you are installing from disks made from the CD, the floppy disk
labels may be different.
4 Click the Start Icon on the Task-Bar and select Run.
5 Type
a:\setup or b:\setup
(depending on which drive holds your installation
disk) in the command line field and click OK.
After a few moments, a message appears warning you to close all other
applications before continuing with this installation.
6 Click Next if you have no other open applications.
If you have open applications, click Cancel to stop this installation. Close
all other applications and start the installation process again.
A message appears that lets you view the README.WRI file for
late-breaking news.
7 Click Yes to view the README.WRI file.
8 When you have finished reading the README.WRI file, choose Exit from the File menu in
the WordPad application.
A Welcome message is displayed that allows you to select Express
Installation, Custom Installation, or Printer Driver Only.
72
Chapter 3