Filter
Top Products
4 Copy the DISKS folder to your hard disk.
5 Double-click the DISKS folder.
6 Double-click the Floppy Disk Maker application.
7 Click Full.
A dialog box appears that gives you some information, such as the
approximate time it will take to copy the images to floppy disks.
8 Click Start to start the copy process.
9 Follow the instructions on the screen until all disk images have been copied.
Installing from the floppy disks
To install the printer software on a Mac OS computer, follow these steps:
1 Quit any programs you are running.
2 Turn off any automatic virus-detection programs you have on your computer.
If you don’t, problems may occur during the installation. After installation is
complete, you can turn the virus-detection programs back on.
3 Make sure the disks are locked.
4 Insert
LaserWriter Disk 1 for Mac OS
into a disk drive.
The disk’s icon appears on the desktop.
Note: If you are installing from floppy disks made from the CD-ROM disc,
the floppy disk label may be different.
5 Double-click the disk icon to open the disk, if necessary.
6 Read the Before You Install file to check for late-breaking news.
7 Double-click the Installer icon to start the Installer program.
After a moment, a Welcome dialog box appears.
33
Setting Up the Printer for Mac OS Users