Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
103
NOTICE: The default QoS scheduling arrangement is a strict priority
schedule. To customize scheduling to set up weighted or round-robin class
clearing, the max_packets values need to be changed.
Example usage:
To configure traffic scheduling:
DGS-3324SRi:4# config scheduling 0 max_packet 15
Command: config scheduling 0 max_packet 15
Success.
DGS-3324SRi:4#
Example usage:
To configure a Combination Queue with a Class 6 priority class with strict priority and the remaining classes as
weighted round robin (WRR) scheduling:
DGS-3324SRi:4# config scheduling 6 max_packet 0
Command: config scheduling 6 max_packet 0
Success.
DGS-3324SRi:4#
show scheduling
Purpose Used to display the currently configured traffic scheduling on the Switch.
Syntax
show scheduling
Description
The show scheduling command displays the current configuration for
the maximum number of packets (max_packets) assigned to the seven
hardware priority classes on the Switch. At this value, it will empty the
seven hardware priority classes in order, from the highest priority (queue
6) to the lowest priority (queue 0).
Parameters None.
Restrictions None.
Example usage:
To display the current scheduling configuration with Class 1 as the strict priority class of a Combination Queue: