D-Link xStackTM DGS/DXS-3300 Series Switch User Manual


 
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
229
======================================================================
Access Profile ID: 2 TYPE : IP
======================================================================
MASK Option :
Protocol ID
--------------------
Access ID : 2 Mode: Deny
Ports: 1:2
--------------------
2
======================================================================
Access Profile ID: 3 TYPE : Packet Content
======================================================================
MASK Option :
Offset 0-15 : 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF
Offset 16-31 : 0x0000FFFF 0xFFFF0000 0x0000000F 0x0F000000
Access ID : 1 Mode: Deny
Ports: 1:1
Offset 0-15 : 0x11111111 0x11111111 0x11111111 0x11111111
Offset 16-31 : 0x00001111 0x11110000 0x00000001 0x01000000
======================================================================
Access Profile ID: 4 TYPE : IPv6
=====================================================================
MASK Option :
Class Flow Label
----- ----------
Access ID : 1 Mode: Deny
Ports: 1:4
----- ----------
1 ABCD
=====================================================================
Total Entries: 4
DGS-3324SRi:4#
create cpu access_profile
Purpose
Used to create an access profile specifically for CPU Interface Filtering
on the Switch and to define which parts of each incoming frame’s header
the Switch will examine. Masks can be entered that will be combined with
the values the Switch finds in the specified frame header fields. Specific
values for the rules are entered using the config cpu access_profile
command, below.