Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
308
DGS-3324SRi:4#config last_hop_spt_threshold 0
Command: config last_hop_spt_threshold 0
Success.
DGS-3324SRi:4#
show pim rpset
Purpose Used to display the RP Set of the Switch.
Syntax
show pim rpset
Description This command will display the information regarding the RP Set
learned by the BSR. This command is for PIM-SM configurations
only.
Parameters None.
Restrictions None.
Usage Example:
To view the RP Set information:
DGS-3324SRi:4# show pim rpset
Command: show pim rpset
Bootstrap Router: 12.43.51.81
Group Address RP Address Holdtime Expired Time Type
--------------------- --------------------- ---------------- ------------------- -------------
224.0.0.1/4 31.43.51.81 150 107
Total Entries: 1
DGS-3324SRi:4#
show pim crp
Purpose Used to display the Candidate RP settings on the Switch, along
with CRP parameters configured for the Switch.
Syntax
show pim crp
Description This command will display the settings for Candidate RPs that are
accessible to the switch. This command is for PIM-SM
configurations only.
Parameters None.
Restrictions Only administrator-level users can use this command.
Usage Example:
To view the CRP settings:
DGS-3324SRi:4# show pim crp
Command: show pim crp
PIM Candidate-RP Table