Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
17
show switch_mode
Purpose Used to display the current switch mode.
Syntax
show switch_mode
Description This command displays the current mode of operation of the
Switch.
Parameters None.
Restrictions None.
Example usage:
To view the current switch mode:
DGS-3324SRi:4#show switch_mode
Command: show switch_mode
Switch is in Layer 3 mode
DGS-3324SRi:4#
show device_status
Purpose Used to display the current status of the hardware of the Switch.
Syntax
show device_status
Description This command displays the current status of the Switch’s physical
elements.
Parameters None.
Restrictions None.
Example usage:
To show the current hardware status of the Switch:
DGS-3324SRi:4#show device_status
Command: show device_status
ID Internal Power External power Side Fan Back Fan
--- ---------------- ---------------- ---------- ----------
2 Active Fail OK OK
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show module_info
Purpose To show information concerning the added uplink module.
Syntax
show module_info