Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
31
delete port_security_entry_vlan_name
Purpose Used to delete an entry from the Switch’s port security settings.
Syntax
delete
port_security_entry_vlan_name <vlan_name 32> port
<port> mac_address <macaddr>
Description This command is used to remove an entry from the port security
entries learned by the Switch and entered into the forwarding
database.
Parameters <vlan_name 32> - Enter the corresponding VLAN of the entry to
delete.
port <port> - Enter the corresponding port of the entry to delete. The
port is specified by listing the lowest switch number and the
beginning port number on that switch, separated by a colon. For
example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch
number 2, port 4.
mac_address <macaddr> - Enter the corresponding MAC address of
the entry to delete.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an entry from the port security list:
DGS-3324SRi:4#delete port_security_entry_vlan_name default
port 1:1 mac_address 00-0C-6E-73-2B-C9
Command: delete port_security_entry_vlan_name default port
1:1 mac_address 00-0C-6E-73-2B-C9
Success
DGS-3324SRi:4#