Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
250
DGS-3324SRi:4#reconfig member_id 2
Command: reconfig member_id 2
DGS-3324SRi:4#
config sim_group
Purpose Used to add candidates and delete members from the SIM group.
Syntax
config sim_group [add <candidate_id 1-100> {<password>} |
delete <member_id 1-32>]
Description This command is used to add candidates and delete members from
the SIM group by ID number.
Parameters add <candidate_id 1-100> <password> - Use this parameter to
change a candidate switch (CaS) to a member switch (MS) of a SIM
group. The CaS may be defined by its ID number and a password (if
necessary).
delete <member_id 1-32> - Use this parameter to delete a member
switch of a SIM group. The member switch should be defined by it ID
number.
Restrictions Only administrator-level users can issue this command.
Example usage:
To add a member:
DGS-3324SRi:4#config sim_group add 2
Command: config sim_group add 2
Please wait for ACK...
SIM Config Success !!!
Success.
DGS-3324SRi:4#
To delete a member:
DGS-3324SRi:4#config sim_group delete 1
Command: config sim_group delete 1
Please wait for ACK...
Success.
DGS-3324SRi:4#