Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
151
config mac_notification ports
[enable | disable] – These commands will enable or disable MAC
address table notification on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable port 7 for MAC address table notification:
DGS-3324SRi:4#config mac_notification ports 1:7 enable
Command: config mac_notification ports 1:7 enable
Success.
DGS-3324SRi:4#
show mac_notification
Purpose Used to display the Switch’s MAC address table notification global
settings.
Syntax
show mac_notification
Description This command is used to display the Switch’s MAC address table
notification global settings.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To view the Switch’s MAC address table notification global settings:
DGS-3324SRi:4#show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State : Enabled
Interval : 1
History Size : 1
DGS-3324SRi:4#