Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
52
8
SWITCH UTILITY COMMANDS
The switch utility commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table. Please note that commands concerning the CompactFlash card (cfg_fromCf, firmware_to CF, etc.) are specific
to the DGS-3324SRi only.
Command Parameters
download [firmware_fromTFTP <ipaddr> <path_filename 64> image_id <int
1-2> {unit [all | <unitid 1-12>]} | cfg_fromTFTP <ipaddr>
<path_filename 64> {increment} | firmware_fromCF <path_filename
64> image_id <int 1-2> | cfg_fromCF <path_filename 64>
{increment}]
download
prom_fromTFTP
<ipaddr> <path_filename 64>
upload [cfg_toTFTP <ipaddr> <path_filename 64> | log_toTFTP <ipaddr>
<path_filename 64> | [firmware_toCF <path_filename 64>
image_id <int 1-2> | cfg_toCF <path_filename 64> | log_toCF
<path_filename 64>]
show
firmware_information
config firmware
image_id
<int 1-2> [delete | boot_up]
ping <ipaddr> {times <value 1-255>} {timeout <sec 1-99>}
traceroute <ipaddr> {ttl <value 1-60> | port <value 30000-64900> | timeout
<sec 1-65535> | probe <value <1-9>
Each command is listed, in detail, in the following sections.
download
Purpose Used to download and install new firmware or a switch
configuration file from a TFTP server or a CompactFlash memory
card.
Syntax
download [firmware_fromTFTP <ipaddr> <path_filename 64>
image_id <int 1-2> {unit [all | <unitid 1-12>]} | cfg_fromTFTP
<ipaddr> <path_filename 64> {increment} | firmware_fromCF
<path_filename 64> image_id <int 1-2> | cfg_fromCF
<path_filename 64> {increment} ]
Description This command is used to download a new firmware or a switch
configuration file from a TFTP server or a CompactFlash memory
card.
Parameters
firmware_fromTFTP − Download and install new firmware on the
Switch from a TFTP server.
firmware_fromCF − Download and install new firmware on the
Switch from a CompactFlash server.
cfg_fromTFTP - Download a switch configuration file from a TFTP
server.
cfg_fromCF - Download a switch configuration file from a CF
server.