Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
312
show pim neighbor
Purpose Used to display PIM neighbors of the Switch.
Syntax
show pim neighbor {ipif <ipif_name12> | ipaddress
<network_address>}
Description This command will display the PIM neighbor table for the Switch.
Parameters <ipif_name 12> - Enter the name of the IP interface for which to
display PIM information regarding PIM neighbors.
ipaddress <network_address> - Enter the IP address of a PIM
neighbor for which to display information.
Adding no parameters to this command will display all PIM
neighbors that probed the Switch.
Restrictions None.
Usage Example:
To view the PIM neighbors:
DGS-3324SRi:4# show pim neighbor
Command: show pim neighbor
PIM Neighbor Address Table
Interface Name Neighbor Address Expired Time
--------------------- --------------------- ------------
n10 10.20.6.251 79
Total Entries: 1
DGS-3324SRi:4#
show pim ipmroute
Purpose Used to display the PIM IP Multicast Route Table on the Switch.
Syntax
show pim ipmroute
Description This command will display the PIM IP Multicast Route Table on the
Switch. This command is for PIM-SM configurations only.
Parameters None.
Restrictions None.
Usage Example:
To view the PIM routes: