Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
190
24
802.1X COMMANDS
The xStack DGS/DXS-3300 series implement the server-side of the IEEE 802.1x Port-based and MAC-based Network Access
Control. This mechanism is intended to allow only authorized users, or other network devices, access to network resources by
establishing criteria for each port on the Switch that a user or network device must meet before allowing that port to forward or
receive frames.
Command Parameters
enable 802.1x
disable 802.1x
create 802.1x user <username 15>
show 802.1x user
delete 802.1x user
show 802.1x auth_state ports [<portlist> | all]
show 802.1x
auth_configuration
ports [<portlist> | all]
config 802.1x auth_mode [port_based | mac_based]
config 802.1x capability [ports <portlist> | all] [authenticator | none]
config 802.1x
auth_parameter ports
[<portlist> | all] [default | {direction [both | in] | port_control
[force_unauth | auto | force_auth] | quiet_period <sec 0-
65535> | tx_period <sec 1-65535> | supp_timeout <sec 1-
65535> | server_timeout <sec 1-65535> | max_req <value 1-
10> | reauth_period <sec 1-65535> | enable_reauth [enable |
disable]}]
config 802.1x
auth_protocol
[local | radius eap]
config 802.1x init {port_based ports [<portlist> | all]} | mac_based [ports]
[<portlist> | all] {mac_address <macaddr>}]
config 802.1x reauth {port_based ports [<portlist> | all]} [<portlist> | all]
{mac_address <macaddr>}]
config radius add <server_index 1-3> <server_ip> key <passwd 32> [default
{auth_port <udp_port_number 1-65535> | acct_port
<udp_port_number 1-65535>}]
config radius delete <server_index 1-3>
config radius <server_index 1-3> {ipaddress <server_ip> | key <passwd
32> [auth_port <udp_port_number 1-65535> acct_port
<udp_port_number 1-65535>]}
show radius
show acct_client
show auth_client
show auth_diagnostics {ports [<portlist> | all]}
show auth_session
statistics
{ports [<portlist> | all]}
show auth_statistics {ports [<portlist> | all]}