Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
139
19
IGMP SNOOPING COMMANDS
The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config igmp_snooping [<vlan_name 32> | all] {host_timeout <sec 1-16711450> |
router_timeout <sec 1-16711450> | leave_timer <sec 1-
16711450> | state [enable | disable] | fast_leave [enable |
disable]}
config igmp_snooping
querier
[<vlan_name 32> | all] {query_interval <sec 1-65535> |
max_response_time <sec 1-25> | robustness_variable <value 1-
255> | last_member_query_interval <sec 1-25> | state [enable |
disable]}
enable igmp_snooping {forward_mcrouter_only}
disable igmp_snooping {forward_mcrouter_only}
config router_ports <vlan_name 32> [add | delete] <portlist>
config
router_ports_forbidden
<vlan_name 32> [add | delete] <portlist>
show router_ports {<vlan_name 32>} {static | dynamic | forbidden}
show igmp_snooping {vlan<vlan_name 32>}
show igmp_snooping
group
{vlan <vlan_name 32>}
show igmp_snooping
forwarding
{vlan <vlan_name 32>}
Each command is listed, in detail, in the following sections.
config igmp_snooping
Purpose Used to configure IGMP snooping on the Switch.
Syntax
config igmp_snooping [<vlan_name 32> | all] {host_timeout <sec 1-
16711450> | router_timeout <sec 1-16711450> | leave_timer <sec 1-
16711450> | state [enable | disable] fast_leave [enable | disable]}
Description This command allows the user to configure IGMP snooping on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which IGMP snooping is to
be configured.
all – Selecting this parameter will configure IGMP snooping for all VLANs
on the Switch.